Directions:
1. Wash and dry the surface thoroughly to remove any dirt or debris.
2. For best results, use a clay bar or AUTOSCRUB surface prep tool to remove any embedded contaminants or stains from the finish.
3. Spray a fine mist of Nanoskin Graphene Ceramic Coating onto one panel (2’ x 2’) at a time or directly onto a microfiber towel.
4. Use the towel to spread the coating evenly onto the surface, making sure to cover every nook and cranny. Then, flip the towel over and wipe the surface to remove any excess coating.
5. Take a dry microfiber towel and buff the surface in a hashtag pattern to a high gloss, reflective shine.
6. Repeat steps 3-5 on the next 2’ x 2’ panel and continue around the car until all exterior surfaces are coated.
PRO TIPS:
For enhanced protection and depth of shine, Nanoskin Graphene Ceramic Coating can be layered within 10 minutes of application.
When applying the coating, it's essential to work in small sections to ensure even coverage and avoid any streaks or missed areas.
If the coating is applied in direct sunlight or on a hot surface, work in even smaller sections to prevent the coating from drying too quickly.
For best results, use a high-quality microfiber towel to avoid any scratches or swirl marks on the surface.
